Factory Wholesale Price Car Wrapping Vinyl Film

You are here: Home » Products » Car Wrap Film » Crystal Series » Factory Wholesale Price Car Wrapping Vinyl Film

Factory Wholesale Price Car Wrapping Vinyl Film


Availability:

Quantity:



Inquire Add to Basket

Transform your car's look with premium color change films! High-quality, durable, and UV-resistant for long-lasting vibrancy. Easy to apply & remove, no residue. Protects original paint from scratches & fading. 300+ colors & finishes (matte, gloss, metallic). Affordable alternative to repainting. Custom designs available. Enhance style & resale value. Weatherproof & self-healing options. Quick installation. Drive with confidence & stand out!"

Product Description

Stunning Aesthetic Transformation – Instantly refresh your vehicle’s look with a wide range of colors (matte, gloss, metallic, satin, chrome, or custom designs).
High-Quality Protection – Shields the original paint from UV rays, minor scratches, stone chips, and environmental contaminants.
Durable & Long-Lasting – Premium vinyl materials with 3M, Avery, or Hexis technology ensure 5+ years of vibrant color without fading or cracking.
100% Reversible – Peel off safely without damaging the factory paint, ideal for leased cars or temporary style changes.
Cost-Effective Customization – Far cheaper than a full repaint while delivering a flawless, high-end finish.
Easy Maintenance – Resistant to dirt and stains; simple to clean with regular car wash products.
Increased Resale Value – Preserves the original paint underneath, keeping your car’s value intact.
Legal & Hassle-Free – Compliant with regulations when properly registered; quick application (completed in 1-2 days).
Unique Branding Potential – Ideal for businesses using wraps for advertising with full-color prints or logos.

Installation Process of Car Wrap Vinyl

Pre-Installation Preparation

First, thoroughly clean the car's surface to remove all dirt, dust, and debris. This involves a two-step wash: a regular soap wash to eliminate surface grime, followed by a clay bar treatment to remove embedded contaminants like industrial fallout. After cleaning, dry the car completely using microfiber towels to avoid water spots. Then, park the vehicle in a dust-free, temperature-controlled environment (ideally between 65-75°F/18-24°C) to ensure optimal film adhesion.

Measurement and Cutting

Measure the specific panels (such as doors, hood, or roof) where the film will be applied. Using precise cutting tools or computer-aided cutting machines, trim the color change film to match the exact dimensions of each panel, leaving a small overlap (about 1-2cm) to account for adjustments during installation. This step ensures a seamless fit without gaps or excess material.

Applying the Squeegee and Activating Adhesion

Spray a solution of water and a small amount of soap (or a dedicated film installation fluid) onto both the car's surface and the adhesive side of the film. This allows the film to slide easily for proper positioning. Once aligned correctly, use a soft, lint-free squeegee to gently push out the water and air bubbles from the center of the panel toward the edges. Work in smooth, overlapping strokes to ensure even adhesion, paying extra attention to curves, creases, and edges to avoid trapping air.

Heating and Shaping (for Curved Surfaces)

For panels with complex curves (like fenders or bumpers), use a heat gun on a low setting to warm the film. This makes the material more flexible, allowing it to conform to the shape of the surface. As you heat, continue squeegeeing to lock the film into place, ensuring it adheres tightly without wrinkling. Be careful not to overheat, as this can damage the film or the car's paint.

Trimming Excess Film

After the film is securely applied, use a sharp blade (like a precision knife with a new blade) to trim off the excess material along the edges of the panel. Hold the blade at a slight angle to avoid scratching the car's paint, and follow the contour of the panel for a clean, professional finish.

Final Inspection and Post-Installation Care

Once all panels are covered, inspect the entire surface for any remaining air bubbles or wrinkles. Small bubbles can often be removed by gently lifting the film with a squeegee and re-squeegeeing. For larger bubbles, a tiny pinhole can be made to release the air, followed by smoothing with the squeegee. After installation, avoid washing the car for at least 48-72 hours to allow the film's adhesive to fully cure. When cleaning later, use mild soap and a soft sponge, avoiding high-pressure washes directly on the edges for the first few weeks.

car wrap full body chrome wrap for car glossy car wrap car foil wrapping glitter car wrap car vinyl wrap midnight purple car wrap design vinyl car wrap 3m vinyl car wrap dragon blood red car vinyl wrap

Related Products

USA Quality Self Healing Car Wrapping Wrap Films

Air Bubble Free Premium PET Glossy Crystal Vehicle Auto Car Wrap Vinyl

Highcool is committed to the fields of automotive window film, automotive paint protection film and automotive color film, providing customers with comprehensive automotive film services with professional products, technologies, services and store management.

CONTACT US

WhatsApp: +8613361992295
Tel: +86-13361992295
E-mail: evan@ihighcool.com
sophie@ihighcool.com
Address: Building C, No. 888, Huanhu West 2nd Road, Lingang New Area, China (Shanghai) Pilot Free Trade Zone

Company Name: Shanghai Chihuan New Material Technology Co., Ltd.

Factory Wholesale Price Car Wrapping Vinyl Film

Related Products

CONTACT US

Quick Links

Product Category

Sign Up For Our Newsletter